SV-30 Ultra-thin Fan Coil Unit
2,690.00 Lei
- Product Code: YG-30
- Availability: In Stock
YG-30 Ultra-thin Fan Coil Unit
This slim fan coil unit is very popular in the world nbecause of the slim body, only 130mm thickness. And on the basic of before unit, we improved the motor, coil and the structure inside for better quality and performance. And it is the good choice for home heating or cooling with water.
Details
Reverse the waterway, low in and hight out, 4 in and 4 out, 28 tubes in total. And large gram header with DN20 pipe connection
Longitudinal reinforcement process at sheet metal bend
Hight-density hydrophilic aluminum fins with large window
Low noise five-speed DC fan motor
ABS material cross flow fan has no peculiar smell, no toxicity and has the characteristics of being inflammable
Hight quality ABS material air outlet, not easy deform and no condensate
Data sheet and parameter
| WATER CHILLED FAN COIL UNIT DATA SHEET | |||||||
| Product name | Ultra-thin exposed FCU | ||||||
| Product type | 2-pipe | ||||||
| Application | It is generally used for home, replaced the traditional radiator | ||||||
| Product function | It can be used for heating or cooling | ||||||
| Voltage | 190-250V (100-120V Available) | Frequency | 50/60Hz | ||||
| Product components | Condenser | Fin | 0,105mm thickness aluminum fins, distance between fins is 1,2mm | ||||
| Copper tube | 0,26mm thickness, 7mm diameter, 28 copper tubes | ||||||
| Drain pan | Material | Steel shet with 6mm insulation | |||||
| Panel | 0,8mm Hot zinc sheet metal with white spray | ||||||
| Motor | Low noise five speed DC fan motor | ||||||
| Label | Labels: model label, wiring diagram, precautions, fan rotaion logo... | ||||||
| Fan | ABS material cross flow fan with low noise | ||||||
| Production technology | Tube | Mechanical expansion, automatic welding | |||||
| Drain pan | One-time molding | ||||||
| Body panel | Fully automatic molding in one molding, with longitudinal reinforcement at the bend, and with hight gloss spray surface treatment | ||||||
| Motor panel | Hydraulic abrasive ribs+longitudinal reinforcement at the bend | ||||||
| Inspection standards | 1.No scratches or rust on the surface of the machine | ||||||
| 2.The internal cooler of the machine has no leakage under the pressure og 1.6Mpa (hold pressure for at least 5min) | |||||||
| 3.The unit starts under the condition of 90% of the rated voltage and runs stably for 10 minutes | |||||||
| 4. Under normal temperature and humidity conditions, use 500V insulation resistance meter to measure the insulation resistance between the live part and non-metal live part of the unit is not less than 2MΩ | |||||||
| Model | Cooling | Heating | Size | Weight | Noise | Working area | Power |
| YG-30 | 5,5kw | 8,25kw | 1220x130x575 mm | 20,5kg | 35-50dB | 30-35 m² | 20w |
Tehnical Specification
- Temperature sensor: NTC thermistor
- Power supply voltage: AC190 ~ 250V, 50/60Hz
- Temperature control accuaracy: ±1°C
- Self-consumation power: < 1W
- Temperature setting: 5 ~ 35°C
- Load current: 2A (resistive load), 1A (inductive load)
- Display range: 0 ~ 50°C
- Wiring terminal: can connect 2x1.5mm² or 1x2.5mm²
- Working enviroment: 0 ~ 45°C
- Display: LED
- Humidity: 5 ~ 95% RH (non-condensing)
- Intal;ation hole distance: 60mm (standard)
- Press Key: touch screen
- Protection level: IP 30
Install way
Can be intalled vertically on the wall or stand on the floor, as well suspended on the ceiling horizontally.
Horizontal Installation
- The four lifting points of the unit must keep the same level when horizontally installed so as not to affect the effect of the machine
- The machine should be installed with water connection pipe according to the pipeline installation diagram. The main condensate pipeline should be slightly lower than the machine to facilitate drainage and prevent backflow.
- The inlet and outlet pipes should be equipped with soft joint and valves to facilitate adjustment of water flow and maintenance. The water inlet pipe should be installed with a filter valve to filter impurities in the water to avoid blockage of the internal pipeline of the unit.
- Be sure to note that the effective diameter of the inlet and return pipes is greater than the inner diameter of the machine interface.
- Power supply for the unit: AC85~260v, 50/60Hz. Note that the voltage is within a safe range, and a safety grounding wire should be installed on the shell of the unit.
- When the unit uses the condensate drain pipe, pay attention to whether the installation method of the machine and the drain pipe used are correct.