High-wall fan coil for higher outputs
Brisell HW
Practical and powerful hydronic split
Brisell HW is the hydronic terminal that encloses in compact dimensions and attractive aesthetics the ideal technologies to achieve thermal and acoustic comfort in residential environments.
- Sound pressure, min speed (*
- 36 – 40 dB(A)
- Total cooling capacity, water 7 °C
- 1'730 – 5'100 W
- Heating capacity, water 45 °C
- 2'198 – 6'478 W
- Water flow rate, cooling
- 5 – 14.9 l/min
Source: Sollis 2024 catalog, pages 16–19.
Description
About Brisell HW
Brisell HW is the hydronic terminal that encloses in compact dimensions and attractive aesthetics the ideal technologies to achieve thermal and acoustic comfort in residential environments. Brisell HW stands out for its high-performance heat exchange and for its fan unit with permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the so-called "ECM" motor): comfort and efficiency.
Brisell HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Brisell HW also means innovation in terms of design, for quiet operation, with a design that fits well with both residential and commercial use. The covering cabinet is white RAL9010, with front panel, sides, upper grille and side doors made of UV-resistant ABS.
When high power is needed in heating and cooling, Brisell HW is the ideal hydrosplit. It can be installed quickly and its three speeds can be controlled with the included remote control. The inverter motor keeps consumption to a minimum.
Brisell HW Inverter is the hydrosplit for wall installation. With elegant aesthetics, a thickness of only 20 cm and high quietness (thanks to the high efficiency heat exchanger with tangential fan group), it can be installed in any residential building. Digital control with infrared remote control supplied as standard. Complete with white body with transparent LCD display, condensate collection tray and removable filter with thick texture. Water connections ½" M.
Models
Brisell HW 350 (THM03A), Brisell HW 500 (THM05A), Brisell HW 700 (THM07A), Brisell HW 850 (THM08A), Brisell HW 1000 (THM10A)
At a glance
Features
- Stylish and modern designWhite ABS front panel with elegant chrome details, designed to blend into any decor; integrated air outlet with motorized flap; the front panel shows operating status and temperature.
- Remote control with sleep settingThe infrared remote control supplied as standard controls the terminal and sets the "sleep reduction"; three speeds.
- ECM motor, low consumptionFan unit with permanent magnet brushless (ECM) motor; the inverter motor keeps consumption to a minimum. The tangential fan generates very low noise.
- Hot and cold only where it's neededEfficient and fast-responding, suited to a discontinuous presence at home; a single terminal meets both heating and cooling requirements, especially with reversible heat pumps.
- Better air qualityAir well filtered by the high-performance filter and constant ventilation, for cleaner air and remarkable hygiene in the rooms.
- Easy to installFits ordinary gas split predisposition boxes (H.int > 10 cm); the sheet metal fixing plate doubles as installation template; the solid hinge facilitates connection and maintenance.
Technical data
Values across the range
Ranges go from the smallest to the largest model. Values depend on the test conditions below.
| Total cooling capacity, water 7 °C (1) | 1'730 – 5'100 W |
|---|---|
| Sensible cooling capacity (1) | 1'418 – 4'181 W |
| Heating capacity, water 45 °C (2) | 2'198 – 6'478 W |
| Water flow rate, cooling (1) | 5 – 14.9 l/min |
| Air flow rate, max speed | 340 – 1020 mc/h |
| Sound pressure, min speed (*) | 36 – 40 dB(A) |
| Sound pressure, max speed (*) | 42 – 49 dB(A) |
| Max electrical consumption | 27 – 65 W |
| Maximum current | 0.15 – 0.36 A |
| Power supply / protection | 230/1+N/50 – IP23 |
| Hydraulic connections | Rc ½" |
| Water content | 0.5 – 1.9 l |
| Dimensions L x H x D | 850 x 300 x 198 mm (350/500/700); 970 x 315 x 235 mm (850/1000) |
| Net weight | 11.5 – 17 kg |
| Max working pressure | 1.6 MPa |
(1) Cooling: water inlet 7 °C, ΔT 5 °C; air 27 °C, RH 47% (UNI EN 1397:2015). (2) Heating: water inlet 45 °C, ΔT 5 °C; air 20 °C DB (UNI EN 1397:2015). (*) Sound pressure: r = 1.5 m, Q = 1 (UNI EN ISO 3741:2010).
Source: Sollis 2024 catalog, pages 16–19.
Dedicated consulting
Tell us about your building
Tell us what you have: an apartment block, offices, an industrial building, a hotel, a guesthouse or a house. We come back with the questions we need answered, arrange a visit and prepare the quote.
Quotes and consulting